1. Home
  2. Fisher & Paykel
  3. Fisher & Paykel DH9060P1 User Manual
  4. Page 30

User Manual - Page 30

For DH9060P1. Also, The document are for others Fisher & Paykel models: DH9060P

Loading ...
Loading ...
Loading ...
28
TROUBLESHOOTING
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
contact your Fisher & Paykel trained and supported service technician.
PROBLEM POSSIBLE CAUSES WHAT TO DO
Pressing ‘POWER’
does not turn on
thedryer
Fault with household
power supply.
Try plugging in and turning on another
electrical device.
Dryer does
notheat
Dryer set to ‘Cool Air’ cycle. Check what cycle the dryer is setto
(refer‘Drying cycles’). Changeto
preferredcycle.
Full water tank. Refer to ‘Emptying the water collection tank’.
The dryer has progressed
to ‘Cool’.
Check the progress — are ‘Cool’ or ‘End’ shown
onthe display? Refer to ‘Progress lights’.
Touching
does not start
thedrying cycle
Dryer door not closed
properly.
Open and reclose the door. Checkthat
the lint filter is correctly in place and not
obstructing the door.
Is the dryer displaying a
user prompt or fault code?
Refer to ‘User warnings’ and ‘Fault codes’.
Water tank full or not
properly in place.
Refer to ‘Emptying the water collection tank’.
Ensure the water tank is properly in place.
Lint filter needs to be
emptied.
Empty the lint filter and ensure it is correctly
in place.
Dryer is overloaded. Remove some items from the dryer.
‘Delay Start’ function is set. Refer to ‘Delay Start’ for more information.
Keylock is ON.
To disable touch and hold
button
for3seconds.
Dryer keeps
stopping
andstarting
The ‘Wrinkle Free’ option
hasbeen selected.
Refer to ‘Wrinkle Free’ for more information.
Dryer stops
working
mid-cycle
Power failure. Press ‘POWER’ and restart the desired cycle.
Dryer has been paused.
Touch the
button to restart thecycle.
Dryer door is open. Ensure the door is firmly shut.
Water tank full or not
properly in place.
Refer to ‘Emptying the water collection tank’.
Ensure the water tank is properly inplace.
Items fell off the rack
whenusing ‘Rack Dry’ or
‘Wool’cycles.
Ensure the rack is installed correctly
(refer to ‘Sorting and loading’, ‘Drying rack’)
and replace garments thatmay have fallen
from it.
Environmental conditions
may be affecting dryer
operation.
In particularly cold conditions, the
roomtemperature may be too cold for
thedryer to run efficiently.
Loading ...
Loading ...
Loading ...