Loading ...
Loading ...
Loading ...
2-29
Keys and doors
– CONTINUED –
closed position. Push the switch again to open the
moonroof completely.
To stop the moonroof at a desired position, simply
push the opposite side of the switch.
After washing the vehicle or after it rains, wipe away
water on the roof prior to opening the moonroof to pre-
vent water drops from falling into the passenger com-
partment.
To close the moonroof
Push and quickly release the front part of the switch to
close the moonroof. The moonroof will stop at a posi-
tion 8 in (20 cm) away from the fully closed position.
Push the switch again to close the moonroof com-
pletely.
To stop the moonroof at a desired position, simply
push the opposite side of the switch.
Anti-entrapment function
When the moonroof senses an object trapped be-
tween its glass and the vehicle’s roof during closure, it
automatically moves back by 6 in (15 cm) from that
point and then stops. The anti-entrapment function
may also be activated by a strong shock on the moon-
roof even when there is nothing trapped.
NOTE
y For the sake of safety, it is recommended that
you avoid driving with the moonroof fully opened.
y Driving with the moonroof fully open can cause
an annoying sound to generate at high speeds. If
such a condition has been encountered, use the
moonroof at the initial stop position of 20 in (50
cm).
y If the moonroof cannot be closed through
switch operation because of system failure, it can
be closed manually using a hex-head wrench. For
the procedure, refer to “Moonroof – if the moon-
roof cannot be closed” in Chapter 9 “In case of
emergency”.
Loading ...
Loading ...
Loading ...