Loading ...
Loading ...
Loading ...
TRANSFER REFRIGERATOR AND
FREEZER DOOR STOPS
Remove the door stop on the right side of the
bottom of the door by removing the two screws
and pulling the door stop free from the door.
Transfer the door bottom thimble to the
opposite door stop hole.
Install the door stop on the left side, making
sure to line up the screw holes in the door stop
with the holes in the bottom of the door.
6
A
B
C
TRANSFER REFRIGERATOR
DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door Handle
and Attach the Fresh Food Door Handle
sections for instructions.
7
Installation Instructions
INSTALL BOTTOM HINGE AND
LEVELING LEG
Using a 1/2” socket ratchet/driver, install the
hinge pin and nut in the opposite hole on the
hinge bracket with leveling leg.
Using a 5/16” socket ratchet/driver, install the
hinge bracket with leveling leg on the left side
of the refrigerator. The pin will be toward the
outside of the refrigerator.
Using a 5/16” socket ratchet/driver, install the
leveling leg bracket on the right side of the
refrigerator.
5
A
B
C
REHANG FREEZER DOOR
Lower the freezer door onto the bottom hinge pin.
Ensure that the plastic hinge pin thimble is on the
hinge pin or inside the door hinge pin hole located
in the bottom of the door.
Straighten the door and line it up with the
center hinge bracket.
Install the center hinge pin with a 3/4” socket
ratchet/driver. Turn it until it extends through
the hinge bracket and into the freezer door.
8
A
B
C
REVERSING THE DOOR SWING (cont.)
24
WARNING
Follow all steps when
reversing the door swing. Failure to follow
these instructions, leaving off parts, or
overtightening screws, can lead to the door
falling off and result in injury and property
damage.
A
Door Bottom
Socket
Door Stop
Door Bottom Thimble
Bottom of Door (Right Side) Bottom of Door (Left Side)
Loading ...
Loading ...
Loading ...