Loading ...
Loading ...
Loading ...
4 5SAFETY
IMPORTANT SAFETY INSTRUCTIONS
SAFETY
BEFORE USING FOR THE FIRST TIME
TIPS & INFORMATION
IMPORTANT
Before switching your BeefEater outdoor display fridge on
for the first time, read the information in this user manual
carefully. This manual contains important information
relating to the assembly, operation and maintenance of the
appliance.
Please keep this booklet in a safe place for future reference.
If you ever sell your BeefEater outdoor display fridge, hand
this user manual to the new owner.
The manufacture does not accept responsibility for any
damages that may arise due to non-observation of these
instructions. The user is liable for any material damage
or bodily injury (product liability) cause by using the
refrigerator carelessly or failing to follow instructions.
• Do not use damaged appliance. If you are in any doubt,
consult a suitably qualified technician.
• Connection and installation of your BeefEater outdoor
display fridge are to be carried out in strict compliance
with the instructions in this manual.
• For safety, the appliance must be properly earthed in
accordance with specifications
• Do not damage any parts of the appliance which carry
refrigerant by piercing, perforating, crushing, twisting or
scraping. If the refrigerant comes into contact with the
eyes, it may cause serious eye injury.
• Always remember to unplug the appliance before
cleaning. Never unplug your appliance by pulling on the
power cable. Always grip plug firmly and pull straight
out from the socket. Always check that the plug and
cable are undamaged.
• All repairs must be carried out by a qualified technician.
Inadequate repairs may be dangerous. Never try to
repair the outdoor display fridge yourself.
• Should the cover of the interior light or fan fall off or
break, switch the outdoor display fridge off immediately
and replace the cover.
• Ensure your chosen location has a flat and stable
surface. The unit may be leveled by turning either or
both of the adjustable feet in the front corners. Check
the unit is level using a spirit level.
• Do not obstruct or cover the ventilation aperture.
• Make sure there is a suitable power Outlet (240 volts,
10 amps outlet) with proper grounding to power the
refrigerator.
Disposal of Old Appliances
Be sure to make any locks unusable, remove any door(s) and
discard separately.
WARNING
WARNING
Chemical hazard: do not allow children to play with the
old appliance.
Contact your local authority for disposal procedures.
Do not position this appliance with its rear panel directly
against a wall. For good circulation and operating efficiency,
the ventilation grilles must never be blocked.
Remove all packaging and place the BeefEater outdoor
display fridge on a stable, secure flat surface. Position the
BeefEater outdoor display fridge away from heat sources,
where the unit is well-ventilated and protected from
moisture, or extremes of heat or cold. The outdoor display
fridge may not function properly if the ambient temperature
rises above 40° for prolonged periods of time.
When installed in a BeefEater Outdoor Kitchen, ensure the
vents behind the outdoor display fridge are clear, clean and
not obstructed from the other side, such that air circulation
is enabled.
Do not use an extension lead. If the mains cable will not
reach the nearest socket, either rearrange your installation
layout or ask a qualified electrician to fit a new socket.
If power is cut off, wait for at least 5 mins before plugging the
unit in again to avoid damaging the compressor.
Do not place combustible, explosive or volatile articles,
corrosive acid or alkali, or liquid in glass containers into the
BeefEater outdoor display fridge. Always exercise caution if
adjusting the temperature.
TIPS & INFORMATION
IMPORTANT
Allow the outdoor display fridge to stand still and upright for
8 hours before plugging it into the power.
Preparation
Position the Shelf-Supports inside the racks on the sides as
illustrated below, at your required level, and then place the
shelves firmly on the supports.
The maximum load for a shelf is 40kg.
NOTE: check that the refrigerator is functioning correctly
before installing shelves and filling it.
Cleaning
1. Unplug your BeefEater outdoor display fridge from
power source and remove any items from inside. It is
best to place these temporarily in another refrigerator.
2. Wash the inner compartment with warm water and
neutral mild detergent. DO NOT allow the control panel,
cables or plug to get wet.
Before disposing of an old appliance, make sure it is
switched off and safe. Unplug the appliance and break any
locks in order to avoid becoming trapped.
NOTE: refrigeration system contains gas and refrigerants
which require specialised waste disposal. Some vulnerable
materials in a refrigerator can be recycled .Contact your
local waste disposal depot for proper disposal of an old
appliance and contact your local authority or dealer if you
have any questions.
Please ensure the cooling systems and tubes of your
refrigerator are not damaged prior to disposal.
You can contribute to environmental awareness by insisting
on an appropriate non-polluting method of disposal.
Disposal of Packaging
Do not allow children to play with the packaging, and
dispose of plastic bags safely.
The cardboard may be broken or cut into smaller pieces
and recycled. Any wrapping cover is made of polyethylene.
The polyethylene pads and padding contain no fluorochloric
hydrocarbons, and as such are most suitable for adequate
recycling.
WARNING
WARNING
R600a refrigerant warning
This appliance contains flammable R600a refrigerant. Avoid
safety hazards by carefully installing, handling, servicing and
disposing of this appliance.
• Ensure that the tubing of the refrigerant circuit is not
damaged during transportation and installation.
• Leaking refrigerant may cause eye injuries or ignite.
• The room for installing appliance must be at least 1m
3
per 8g of refrigerant. The amount of refrigerant in the
appliance can be found on the rating plate inside the
appliance.
• If you are unsure of the refrigerant check the rating
plate inside the refrigerator compartment.
• It is a hazardous for everyone other than an Authorised
Service Person to service this appliance. In Queensland
Australia the Authorisation Service Person MUST hold a
Gas Work Authorisation for hydrocarbon refrigerants to
carry out servicing or repairs which involve the removal
of covers.
• Keep ventilation openings in the appliance enclosure or
in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
TIPS & INFORMATION
IMPORTANT
NEVER use corrosive detergents, wire blasters, or abrasive
scourers to clean your BeefEater outdoor display fridge.
NEVER use metal or sharp implements to scrape any part of
the fridge.
3. Dry all surface thoroughly.
4. To ensure trouble-free operation the condenser should
be cleaned every three months where appropriate using
a vacuum hose. The condenser is located behind lower
grill of the cabinet. In exceptionally dusty
TIPS & INFORMATION
IMPORTANT
It is recommended that areas around the condenser are
cleaned more often.
5. Use mild soapy water to clean the gasket and seals
around the door.
6. The external surfaces of the fridge can be cleaned with
warm water and mild detergent, or with a suitable
Stainless-Steel cleaning material.
Loading ...
Loading ...
Loading ...