Loading ...
Loading ...
Loading ...
2-19
Essential Safety Equipment
Seat Belt Systems
Form No. 8S18-EA-03I
The seat belt warning light illuminates
and a beep sound will be heard if the
driver’s seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
Using an Extender That is Too Long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Don’t use the extender or choose one
shorter in length if the distance
between the extender’s buckle and the
center of the user’s body is less than
15cm (6 in).
NOTE
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left connected,
the seat belt warning light will not
illuminate and function properly.
WARNING
Seat Belt Warning Light/
Beep
Condition
Result
The driver’s seat belt is
not fastened when the
ignition switch is turned
to the ON position.
The warning light
illuminates for about
1 minute and a beep
sound will be heard
for about 6 seconds.
The driver’s seat belt is
fastened while the
warning light and the
beep are activated.
The warning light
turns off and the
beep sound stops.
The driver’s seat belt is
fastened before the
ignition switch is turned
to the ON position.
The warning light
will not illuminate
and the beep sound
will not be heard.
J48C_8S18-EA-03I_Edition1.book Page 19 Wednesday, August 6, 2003 8:51 AM
Loading ...
Loading ...
Loading ...