Loading ...
Loading ...
Loading ...
23
INSTALLATION
Replacing the oven door
(to be done by qualified personnel only)
1� Hold door with both hands�
2� Locate both hinges into the frame slots at the
same time�
installation
Procedure to assemble the door
(to be done by personnel only)
Procedure to assemble the door (to be done by qualified personnel only).
3. Open door fully and rotate
the stirrups away from you,
back to their original position.
1. Hold door with both
hands and locate both
hinges into the frame slots
at the same time.
Frame slot
Hinge
Notch
4. Close the door fully.
2. Ensure that the location notch drops into the
frame slot.
Care should be taken not to damage other
parts of the cooker.
Frame slot
Hinge
Notch
Frame slot
Hinge
Notch
1. Hold door with both hands.
2. Locate both hinges into the frame slots at the
same time.
3. Ensure that the location notch drops into frame
slot. Care should be taken not to damage other
parts of the cooker.
4. Open door fully and rotate stirrups away from
you back to their original position.
5. Close the door fully.
Chef 540 Upright Cooker INSTALLATION 19
Notch
3� Ensure that the location notch drops into frame
slot� Care should be taken not to damage other
parts of the cooker�
Notch
Hinge
Frame slot
4� Open door fully and rotate stirrups away from
you back to their original position�
5� Close the door fully�
6� Carefully remove any protective plastic film to prevent
damage to the appliance�
Service fuse location – Models with power point only
This product is fitted with a power outlet at each end of the
control panel�
The outlets are protected by a replaceable 15 amp fuse located
at the rear of the product�
WARNING
WARNING
Before servicing the fuse, ensure that all power to the product
is switched off�
To access fuse, unscrew fuse housing and remove from
appliance� (See diagram)�
7
Fuse
Fuse housing
INSTALLATION
Loading ...
Loading ...
Loading ...