Loading ...
Loading ...
Loading ...
7
ADJUSTING AIRFLOW DIRECTION (CONTINUED)
Wall mounted (K1)
A. Vertical directions (automatic)
Confirm that the remote controller has been turned on. Press the FLAP button to start the flap
moving up and down. If you want to stop the flap movement and to direct the air in the desired
direction, press the FLAP button again. In the cool mode, don’t direct the flap down more than
30°, otherwise, condensation may drip on to the floor. Zone “A” is the recommended flap
position for cooling.
Do not move the flap with your hands.
B. Horizontal directions (manual)
The horizontal airflow can be adjusted manually by moving the vertical vanes to the left or right.
Low Silhouette Ducted (F1)
This air conditioner is not equipped with air outlet parts. These must be obtained locally. Please
refer to the manual of the locally adopted air outlet parts.
Indoor unit
Zone ‘‘B’’ for
heating
Zone ‘‘A’’
for cooling
30°
60°
Left
Air outlet
grille
Right
Vertical vanes
Up
Down
Flap
163011_SingleSplit_EN_1.fm Page 7 Thursday, September 15, 2011 9:00 AM
Loading ...
Loading ...
Loading ...