F6DW24FI1 User Manual

Loading ...

5 OPERATING INSTRUCTIONS

BEFORE STARTING TO USE THE APPLIANCE, MAKE SURE YOU HAVE

READ AND UNDERSTOOD ALL THE WARNINGS CONTAINED IN CHAP-

TER  “IMPORTANT SAFETY INSTRUCTION4”.

0ODFUIFEJTIXBTIFSIBTCFFODPSSFDUMZJOTUBMMFEQSFQBSFGPSVTFBTGPMMPXT

BEEUIFSJOTFBJEBOEEFUFSHFOU

t BEKVTUUIFXBUFSTPGUFOJOHTZTUFN

t BEEUIFSFHFOFSBUJOHTBMU

5.1 Using the water softening system

The amount of scale contained in the water (water hardness index) can cause whit-

ish IB[F on the dry dishes, which tend to become dull over time. The dishwasher is

equipped with an automatic softening system which uses a special regenerat-

ing salt to reduce the hardness of the water. The dishwasher is factory set for water

hardness level 3 (average hardness 41-60°dF – 24-31°dH / 23.6-35 gpg). When us-

ing water of medium hardness, the regenerating salt container should be relled

after approximately 20 washing cycles. The salt container can hold approximately

1.7 Kg (3.75 lb) of salt in grains. Some models are equipped with an optical no-salt

indicator. In these models, the cap of the salt container contains a green oat which

descends as the salt concentration in the water drops. When the green oat can no

longer be seen, the container must be topped up with regenerating salt. The con-

tainer is situated at the bottom of the dishwasher. After removing the lower rack,

unscrew the salt container cap (ref. A fig. CFMPX) by turning it anticlockwise and

pour in the salt using the funnel (GPMMPXJOH GJHVSF) supplied with the dishwasher.

Before replacing the cap (ref. A fig. CFMPX), remove any salt residues from around

the opening.

USER INSTRUCTIONS

Loading ...

User Manual - Page 20