Loading ...
Loading ...
Loading ...
3 Apply a thin layer of grease around the shaft in the bottom of the brew
group.
4 Apply a thin layer of grease to the rails on both sides (see figure).
5 Reinsert the brew group (see 'Reinserting the brew group').
You can use the grease tube multiple times.
Cleaning the automatic milk frother
Quick cleaning of the milk frothing system
Note: Perform the quick cleaning procedure after brewing a milk-based
beverage.
1 Place a cup under the automatic milk frother.
2 Press the HOT WATER button once.
3 Dispense hot water for 5 seconds.
4 To stop dispensing hot water, press the OK button.
Daily cleaning of the automatic milk frother
1 Insert the suction tube into a jug filled with fresh water.
2 Place an empty container under the automatic milk frother. Press the
MILK FROTH button.
3 When the water that flows out of the automatic milk frother is clean,
press the escape button to stop dispensing water.
Note: If there are still some drops of milk present in the suction tube after
cleaning, remove the suction tube from the jug and dispense steam for
about 5 seconds.
Monthly cleaning of the automatic milk frother
1 Pour the contents of a Saeco milk circuit cleaning sachet into a jug. Add
half a liter of water.
2 Insert the suction tube into the jug.
3 Place a container under the automatic milk frother.
4 Press the MILK FROTH button.
5 You can press OK to stop or let the machine dispense until it stops
automatically.
19
English
Loading ...
Loading ...
Loading ...