Loading ...
Loading ...
Loading ...
Installation
20
3. Pull the knobs upwards to remove them.
4. Unscrew the burner rings using the
supplied wrench.
5. Remove the top.
Replacing nozzles
1. Unscrew screw A and push air regulator
B as far as it will go.
2. Use a spanner to remove the nozzles C
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see “Burner
and nozzle characteristics table”).
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...