Loading ...
Loading ...
Loading ...
Drying Procedures
Follow fabric care label instructions
Placesmalt items in a mesh bag
I
Filldryerdrum 1/3to !/2 full
o Followthe guidelines below for preparing the load for drying°
= ReadDryer Operating Instructions for operating your specific model,
= Always read and follow fabric care labels and laundry product labels.
To reduce the riskof fire, electrical shock, or injury to persons, read
Important Safety Instructions, pages 2-3, before operating this dryer,
t
Prepare items for drying.
• Dry items of similar fabric, weight and construction in the same Ioado
= Separatedark itemsfrom fight-colored items.Separate itemsthat shed lint
from those that attract lint, If an item sheds lint, turn it inside out
• Be sure buckles, buttons and trim are heatproof and won't damage the
drum finish. Close zippers, fasten hooks and Velcro®-like fasteners. Tie
strings and sashesto prevent snagging and tangling.
• If possible, turn pockets inside out for even drying.
• Checkfor stainswhich may not havebeen removed in washing. Dryer heat
may permanently set some stains, Repeat stain removal process before
drying.
= Placesmall items in a mesh bag to prevent tangling and for easy removal
Check that lint screen is clean and in place.
m
Load the dryer.
° The average load will fill the drum I/3 to 1/2 full, Items need room to
tumble freely for even drying and lesswrinkling, Do not overload dryer.
= When drying large items, dry only 2 or3 at atime, Fillout the load with small
and medium sized items,
= Fordelicate or verysmall loads, add 2 lint-free towels for better drying, less
wrinkling, and to prevent grease stains caused by fabric softener sheets,
• Donot overdryitems Overdrying cancausewrinkling, shrinkage, harshness,
and a build-up of static electricit_/,which can produce more lint,
- If desired, add a dryer fabric softener sheet
4. Close the dryer door and set dryer controls (some models).
See Dryer Operating instructions card for your specific model controls,
7_
Turn cycle selector clockwise to the desired setting.
Start the dryer.
• Turn the Turn to Start control clockwise to ON, Hold for 1-2 seconds and
release,
Toadd or remove itemswhen the dryer isrunning, open the door Thedryer
will always stop when the door is opened Allow the drum to come to a
complete stop before reaching inside°
Torestart dryer, closethe door then turn the Turn to Start control clockwise
to ON. Hold for t-2 seconds and release
When the cycle ends, remove items immediately and hang
or fold. If load isremoved before the cycle ends, turn cycle selector to OFF
9
Loading ...
Loading ...
Loading ...