Loading ...
Loading ...
Loading ...
en Cleaning and servicing
42
Self-cleaning interior
1
To remove deposits, the appliance
self-cleans the interior at regular inter-
vals.
The programme sequence is auto-
matically adjusted for self-cleaning,
e.g. the cleaning temperature is
briefly increased. Consumption val-
ues, e.g. water and electricity, may
also increase.
If the interior is no longer self-cleaned
adequately and deposits occur, see
this information:
→"Cleaning the tub", Page41.
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→"Safe use", Page11
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action Benefit
Wipe the door seals,
the front of the dish-
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This will prevent un-
pleasant odours.
Machine Care
1
Deposits can cause your dishwasher
to malfunction, e.g. due to grease or
limescale. To avoid such faults and
reduce odours, we recommend
cleaning your appliance at regular in-
tervals.
Machine Care combined with com-
mercially available machine care
products is the right programme for
the care of your appliance.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if ad-
vised to do so by the display. Once
you have run the Machine Care pro-
gramme, the indicator goes out. If
your appliance does not have a re-
minder function, follow the directions
for use on the machine care
products.
Performing Machine Care
Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.
Notes
¡ Run the Machine Care programme
without any tableware in the dish-
washer.
¡ Only use suitable machine care
products specially designed for
dishwashers and not dishwasher
detergent. Observe the manufac-
turer's instructions.
¡ Make sure that there are no alu-
minium parts in the interior of the
appliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡ Follow the safety instructions and
the directions for use on the pack-
agings of the machine care
products.
1. Remove any coarse soiling in the
interior with a damp cloth.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...