Loading ...
Loading ...
Loading ...
- 55 -
www.SCEPTRE.com
SCEPTRE SR Series User Manual
Problems
Solutions
I CANNOT CHANGE
THE TIME MANUALLY
Your display syncs time automatically according to your local
televised channel. This function only works while the
(optional) TV tuner is connected to an ANTENNA.
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed
captioning and the box will disappear. Refer to page 34 for
more information.
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The display has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
When your display’s resolution is higher than the digital
channel’s broadcast resolution, the signal is up-converted to
match your display’s resolution. Up-converting can cause this
type of effect.
TIPS FOR HIGH
DEFINITION USERS
The display is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI,
YPbPr (Component), then VGA. However, due to variances in
broadcast practices, it is possible some image distortions can
occur.
TIPS FOR
LETTERBOX
CONTENT USERS
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The display has
the capability of expanding this content so the entire screen is
filled at the expense of the image proportion. To use this
function press the aspect button on the remote control and
cycle among the available options.
I CANNOT FIND THE
VOLUME AND
CHANNEL
CHANGING
BUTTONS
The buttons are represented by the ▲▼◄► buttons located
on the remote control. ▲▼ changes the channels and ◄►
changes the volume.
DISPLAY TURNS OFF
AUTOMATICALLY
AFTER 10 MINUTES
The display features a power saving mode which will
automatically turn off the display, if there’s no signal provided
for more than 10 minutes.
My cell phone doesn’t
work when I connect
the MHL cable to
HDMI.
Check if you connected to HDMI3 or another HDMI since
ONLY HDMI3 works with MHL. If it still doesn’t work make
sure you have the correct MHL cable (some have more pins
than others). Ultimately, please consult your cell phone
manufacturer for compatibility issues.
Under MHL the
DISPLAY’s remote
won’t control the cell
phone screen fully.
For total control you will need to use the cell phone’s touch
screen. The display’s remote have limited functions and its
controls are dependent on the program you are using.
UNDER MHL THE
DISPLAY’S REMOTE
WON’T CONTROL
THE CELL PHONE
SCREEN FULLY
For total control you will need to use the cell phone’s touch
screen. The display’s remote have limited functions and its
controls are dependent on the program you are using.
Loading ...
Loading ...
Loading ...