Loading ...
Loading ...
Loading ...
Control function operation
33
LOCK” indicator light blinks two or three
times, then comes on. This indicates the un-
lock mode is selected.
EJU31153
Engine stop switch “ ”
The engine stop switch (red button) stops the
engine when the switch is pushed.
EJU31164
Engine shut-off switch “ ”
The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls
off the watercraft.
Insert the clip under the engine shut-off
switch before starting the engine.
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
eration by children or others.
EJU42323
Start switch “ ”
NOTICE
ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
1 “L-Mode” (unlock) button
2 “UNLOCK” indicator light
1 Engine stop switch
2
L-Mode
1
1
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
1
2
3
UF2W12E0.book Page 33 Thursday, October 8, 2015 3:01 PM
Loading ...
Loading ...
Loading ...