Loading ...
Loading ...
Loading ...
12 49-90585
REMOVE THE DOOR ASSEMBLY
A. Open the door to approximately 130 degrees.
1
REMOVE HINGE AND COVER
IMPORTANT: Note the location of the hinge (left
or right) before removing.
A. Remove the 6 machine screws from the hinge
and the 2 machine screws from the hinge cover.
Optional Instructions
B. Remove the 6 tapping screws located around
the perimeter of the door outlining the gasket.
Remove the outer ring.
C. Remove 3 hinge screws starting at the
bottom and move up. Make sure the door is
supported while removing the screws.
REINSTALL HINGE ASSEMBLY
A. Place the hinge in the opposite side of the
door as shown. Push the hinge in place until
the hinge holes align with the door holes.
D. Loosen the top screw as shown. Unhook the door
by lifting and pulling. Remove the top screw.
First remove
three lower
hinge screws
Then loosen top
screw, remove door
and remove screw
2
B. With the screws removed, turn the door over
and separate the outer door assembly and hinge
cover of the door from the door frame and set
aside.
3
Hinge
Hinge
Cover
Hinge
Hinge
Cover
Hinge shown
on opposite
side
REVERSING THE DOOR SWING (if desired)
Loading ...
Loading ...
Loading ...