Loading ...
Loading ...
Loading ...
20_Installation & maintenance Troubleshooting_21
installation & maintenance
CLEANING THE FILTER
Clean the filter net often to keep the washer clean.
1. Push the upper part of the Magic filter
and pull in.
2. Open the cover as shown in the figure.
3. Clean the Magic filter. 4. Close the cover and insert the lower part of
the filter in the basket first and then push
the filter with “click” sound.
HOW TO CLEAN THE PUMP FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise and pull out the filter.
3. Remove dirts and rotate the filter clockwise until it locks in position.
PRECAUTIONS
WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.
Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.
How to earth an outlet with earthing terminals when an
earthed power load is not fitted.
Outlet with earthing terminals:
•
Even when the internal wires of the earthing terminals are joined,
connect the earthing conductor (green) of the machine to the tap.
When using an extension cord and a boosting transformer:
• Make sure that the earthing conductor is connected.
Never make an earthing to
• The telephone line, lightning rod, or gas pipe as it is
extremely dangerous in case of lightning strikes.
FILTER
OPEN
CLOSE
RAG
REAR SIDE
Earthing
terminals
Gas pipe
Earthing
conductor
Earthing
conductor
SW55USPIW-02445K_EN(ÀÓ½Ã).indd 20 2009-05-28 ¿ÀÈÄ 4:29:05
Loading ...
Loading ...
Loading ...