Loading ...
Loading ...
Loading ...
36
5 Maintenance
You can initiate the rinse operation manually at any time.
Precondition:
‘Please select product’ is displayed.
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
‘Maintenance status’
T Press the Rotary Switch.
‘Clean’
T Turn the Rotary Switch until ‘Rinse’ is displayed.
T Press the Rotary Switch to initiate the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water
flows out of the dual spout. The rinse stops automatically.
‘Please select product’ appears on the display.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
15 minutes after milk preparation,
‘Milk system is being rinsed’
appears, water flows out of the dual spout. The rinse stops
automatically. Your Z6 is once more ready for use.
To ensure that the milk system in the dual spout always works
properly, you must clean it daily when you have been preparing
milk.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
Harmful and irritating cleaning agent. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large
quantities of water. Do not induce vomiting. Seek medical
advice immediately and show label.
Rinsing the machine
Automatic milk system
rinsing
Cleaning the milk system
J WARNING
J WARNING
Loading ...
Loading ...
Loading ...