Loading ...
Loading ...
Loading ...
32
4 Permanent settings in programming mode
T Turn the Rotary Switch until ‘oz’ is displayed.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Units’
T Press the ‘ button the number of times needed to display
the start screen again.
In the program item
‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting: All user settings (apart
from the ‘filter’ and ‘water hardness’) are reset to factory settings.
Your Z6 then switches off.
Precondition:
‘Please select product’ is displayed.
T Press the Rotary Switch.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Factory setting’ is displayed.
T Press the Rotary Switch to enter the program item.
‘Factory setting’ / ‘Reset the machine to the factory
settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your Z6 is switched off.
In the program item
‘Machine settings’/ ‘Water tank illumination’
you can change the setting for water tank illumination:
U
‘Permanent’: The water tank is always illuminated.
U
‘Temporary’: The water tank is only illuminated when a
product is being prepared.
Example:Proceed as follows to change the water tank illumination
from
‘Permanent’ to ‘Temporary’.
Precondition:
‘Please select product’ is displayed.
T Press the Rotary Switch.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
Restore factory settings
Water tank illumination
Loading ...
Loading ...
Loading ...