Loading ...
Loading ...
Loading ...
41
TROUBLESHOOTING GUIDE
FAQS (FREQUENTLY ASKED QUESTIONS)
Q: What are the best temperature settings for my refrigerator and freezer?
A: The default setting for the refrigerator is 37° Fahrenheit (3° Celsius). The default setting for the freezer is 0°
Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired temperatures. Milk should be

the freezer. To switch the display from Fahrenheit to Celsius, press and hold the Freezer and Refrigerator buttons
until you hear a beep and the settings in the display change.
Q: How do I set the refrigerator and freezer temperatures?
A: Continually press the Refrigerator or Freezer button on the control panel until the desired temperature appears. The
numbers will cycle from highest to lowest and then return to the highest again with continuous pressing.
Q: Why do I hear a buzzing noise from my refrigerator periodically?
A: This may happen if you do not have a water source attached to your refrigerator and the icemaker is turned on. If

Q: Why does the icemaker tray look crooked?
A: This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt. The change in
position is to assist in the freezing process.
Q: My refrigerator is powered on and the controls are working, but it’s not cooling and the display shows “OFF” (see
below). What is wrong?
A: The refrigerator is in Demo Mode. The Demo Mode disables all cooling in the refrigerator and freezer sections to
conserve energy while on display in a retail store. When activated, OFF is displayed on the control panel and the
display remains on for 20 seconds. With either refrigerator door opened, press and hold the Refrigerator Temp
button and press the Accela Ice button 3 times. The control panel beeps and the temperature settings display to

Before conducting troubleshooting, make sure that the following basic requirements are met:
Service Flow 0.5 gpm (1.9 lpm)
Water Supply Potable Water
Water Pressure 20-120 psi (138-827 kPa)
Operating Ambient Temperature Limits 55°F–110°F (12.8°C–43.3°C)
Electrical Ratings 115 V, 60 Hz, AC only, and fused at 15 or 20 amperes
Loading ...
Loading ...
Loading ...