Loading ...
Loading ...
Loading ...
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in
serious personal injury.
If any parts are damaged or missing, please call 800-406-2005.
ASSEMBLY
Do not attempt to modify this product or create
accessories or attachments not recommended for use
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
OPERATION
Applications
You may use this product for the following purpose:
• Light-duty vacuuming of wet or dry surfaces.
Installing/Removing the Flexible Hose
See Figure 1, page 9
•
hose with the slot on the vacuum port. Push in and twist
counterclockwise to lock.
•
•
hose.
•
unlock and pull away from the vacuum port.
Installing/Removing Battery Pack
See gure 2, page 9
• Set the On/Off switch to the Off position.
• Insert the battery pack into the product as shown.
• Make sure the latches on each side of the battery pack
snap into place and that battery pack is secured in the
product before beginning operation.
• Depress the latches to remove battery pack.
Charging the Battery Pack
See gure 3, page 9
•
to 3 hours. Due to federal regulations, the battery does
not come fully charged.
• Plug the charger into a power outlet.
• Attach the battery pack to the charger by aligning the
ribs on the battery pack to the grooves in the charger.
Slide the battery pack into the charger.
• When charging, the lights on the battery will illuminate
to show the state of charge. The light on the charger
• If the light on the charger illuminates red, there is an
error with the battery or the charger. Wait 1 hour and try
again or call customer service for support.
• When charge is complete the lights on the battery will
turn off and the light on the charger will be solid.
• To remove the battery pack from the charger, press the
latches and pull up on the battery pack.
Starting/Stopping the Wet/Dry Vac
See gure 4, page 9
• To start the wet/dry vac: Press the On/Off switch to the
On position.
• To stop the wet/dry vac: Press the On/Off switch to the
Off position.
WARNING!
WARNING!
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction of a
WARNING!
Always remove battery pack from the product when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent ac-
cidental starting that could cause serious personal injury.
WARNING!
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
WARNING!
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
WARNING!
PG.5
Loading ...
Loading ...
Loading ...