Loading ...
Loading ...
Loading ...
Installation Instructions - 35
Moving and Installing
Installing the anchor bolts
1. Unscrew and remove each cover cap.
2. Pull the bolt out until the tip is level
with the tip of the sleeve.
Haveanotherpersonholdthetopofthe
drum.
Samelevel
3. Insert each anchor bolt.
4. Tighten each bolt so that the spring
extends out to the length of 26 mm.
26mm
B
A
Levelling the appliance
Usingalevelenableseaseinadjustments.
Toadjustthestands,usethe‘A’endofthe
spanner.
B
A
Locknut
Stand
1. Loosen the lock nut on each stand by
turning it clockwise.
2. Adjust each stand by turning it
clockwise or anticlockwise.
3. Use a spirit level to make sure that
the appliance is properly levelled.
4. Tighten each lock nut by turning it
anticlockwise.
CAUTION
Make sure that all lock nuts are
tightened securely and the stands
are still securely bolted to the
appliance.
Iftheyareunbolted,theappliancewill
movearound.
NA-140_148VS4_AUNZ_EN_20140213.indb 35 2014/02/13 13:35:42
Loading ...
Loading ...
Loading ...