Neff T59TF6RN0 N 90 Induction Hob 90 cm

User Manual - Page 34

For T59TF6RN0. Also, The document are for others Neff models: T59.F6...

PDF File Manual, 48 pages, Read Online | Download pdf file

T59TF6RN0 photo
Loading ...
Loading ...
Loading ...
en Home Connect
34
Wi-Fi symbols
The Wi-Fi indicator on the main control panel changes
depending on the status and quality of the connection
and the availability of the Home Connect server.
Touch the
D symbol to see a description of the
displayed symbols.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
1. Touch the 0 sensor and then select the 4 MyProfile
option to access the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Wi-Fi".
4. Touch "Switched off".
This deactivates Wi-Fi; the D symbol will go out on the
control panel.
Disconnecting from the network
Di s connec t i ng from the net wor k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1. Touch the 0 sensor and then select the 4 MyProfile
option to access the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Delete network".
4. Touch "Next" to confirm.
This disconnects the appliance from your home
network; the D symbol will go out on the control panel.
Note:
The network connection will also be deleted if you
restore the factory settings on your appliance.
Connecting to the network
Connect i ng to the net wor k
1. Touch the 0 sensor and then select the 4 MyProfile
option to access the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use wizard to configure settings" to launch
the Home Connect assistant.
4. Follow the instructions as per ~ "Automatic
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
The app must be open and be set up.
If your extractor hood is directly connected, first
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 34~ "Connecting to the network"
on page 34


:L)L
6ZLWFKHGRII
6ZLWFKHGRQ
'LVFDUG1H[W
'HOHWHQHWZRUN
'HOHWHDOOQHWZRUNVHWWLQJVIURPWKHDSSOLDQFH"
Loading ...
Loading ...
Loading ...