Loading ...
Loading ...
Loading ...
12
PAge heAder.....
PROGRAMMING THE TEMPERATURE
SWITCH ON
Insert the power plug into the power point
and switch on. "––––" will flash on display
panel.
ON/OFF
Press the MODE button to set the cooking
setting to LOW, MED, HIGH or WARM. The
LED illuminates and moves from LOW >
MED > HIGH > WARM.
HIGH SETTING
The HIGH setting is used when cooking
dried beans or pulses and will cook food in
half the time required for the LOW setting.
Occasional stirring of stews and casseroles
will improve the flavour distribution.
Press the MODE button until the light
above the HIGH is lit. The default time
will show 6:00 hours. Press the COOK
TIME button to increase the time in 0:30
minute increments up to 10 hours. The
time will then begin again at 0:30 minutes.
Depending on the recipe some foods may
come to a simmer or boil during the cooking
process. Press the START/CANCEL button
to start cooking, press again to cancel.
At the end of the High cooking time, the
WARM setting commences automatically.
The Warm LED illuminates and the timer
set to 6.00 hours as default.
MEDIUM SETTING
The medium heat setting is ideal for
when you have a cooking time frame for
approximately 4–6 hours. Press the MODE
button until the light above the MED is lit.
The default time will show 6:00 hours. Press
the COOK TIME button to increase the time
in 0:30 minute increments up to 10 hours.
The time will then begin again at 0:30
minutes. Press the START/CANCEL button
to start the cooking, press again to cancel.
Depending on the recipe some foods
may come to a simmer or boil during the
cooking process. At the end of the medium
cooking time, warm setting commences
automatically. The warm LED lights up and
the timer set to 6.00 hours as default.
LOW SETTING
The LOW setting gently cooks food
for an extended period of time without
overcooking or burning. This setting is ideal
for soups and dishes high in liquid and large
pieces of meats.
Press the MODE button until the light
above the LOW is lit. The default time
will show 6:00 hours. Press the COOK
TIME button to increase the time in 0:30
minute increments up to 10 hours. The
time will then begin again at 0:30 minutes.
Press the START/CANCEL button to start
cooking, press again to cancel. The slow
cooker will then start the cooking process
unless the Cook button is pressed again for
another selection. At the end of the LOW
cooking time, the warm setting commences
automatically. The warm LED lights up and
the timer set to 6.00 hours as default.
Depending on the recipe some foods may
come to a simmer or boil during the cooking
process. At the end of the LOW cooking
time, the WARM setting commences
automatically. The Warm LED lights up and
the timer set to 6.00 hours as default.
NOTE
If the HIGH cooking time is changed,
the LOW cooking time will show
the same time. Use the COOK TIME
button to select the LOW cooking
time required.
Loading ...
Loading ...
Loading ...