Loading ...
Loading ...
Loading ...
Step 6: Two people are suggested for this step. Place the center Support Bar into the top
grove on the back of the frame at the approximate center point. Carefully pull the
bottom horizontal frame outward and place the center Support Bar at the approximate
center point of the frame, carefully release the frame once the bar is centered.
(See illustration below)
Spring Attachment Method
Step 7. Once the corners and center support bar are secure, continue attaching the
remainder of the springs to the material. Connect the center of the vertical and
horizontal portions of the material, then work your way around the rest of the frame.
Screen Material
Note (after all springs have been attached):
Correct material installation -Corners of the screen material are properly wrapped
around the corner edges of the frame and material is evenly tensioned and flat,
creating a nicely taut surface.
Rev.101321NAS www.akiascreens.com U-00235 5
Attention: Do not proceed with the Edge Trim installation until making sure there are no ripples in the material.
Loading ...
Loading ...
Loading ...