Loading ...
Loading ...
Loading ...
25
Streaks on
glassware or
residue on
the dishes
1. Incorrect rinse aid setting. 1. Depending on the hardness of
water, adjust the rinse agent dis-
penser. Refer to “Adding Detergent
and Rinse Aid” section in the man-
ual.
Dishes are
not getting
dry enough
1. Rinse aid dispenser is empty.
2. Improper loading of dishes.
Note: Plastic or Teflon do not typically dry
as well as other items due to their inher-
ent properties.
1. Add rinse aid - the use of rinse agent
improves drying, use the Auto cycle, use
the Sanitize option.
2. Rearrange load to ensure items are
not nesting (see “Loading the Dish-
washer” section of the manual).
Note: Select models offer an extra heat-
ing option to improve drying perfor-
mance.
Odor
Note: Water
testing is done
in the factory.
Occasionally
water may still
appear in dish-
washer at pur-
chase which
may create an
odor.
1. Food debris is present at the bot-
tom of the dishwasher.
2. Food particles are present near
the door seal.
3. Residual water is present at the bot-
tom of the dishwasher.
4. Drain hose is obstructed.
1. Remove the filters and clean accord-
ing to the “Care and Maintenance” sec-
tion of the manual.
2. Refer to “Care and Maintenance” sec-
tion of the manual.
3. Ensure the unit has completely
drained from the last cycle.
4. Remove any obstructions from the
drain hose by calling qualified personnel.
Note: If odor still persists, run the Nor-
mal/Regular cycle until it flushes and
interrupt the cycle and place an 8 oz.
cup of distilled white vinegar solution on
the upper rack and then finish the cycle.
Dishwasher
not filling
with water or
“Check water
supply” dis-
play lights up
1. Restriction in the water supply
system.
2. Previous wash cycle was not com-
pleted.
3. Delay start is active.
4. Household water supply turned
off.
1. Ensure that the water supply valve
(typically located under kitchen sink)
is open and check that the water sup-
ply line has no kinks or clogs.
2. Refer to the “Operating the Dish-
washer” section of the manual.
3. Cancel the delay start or wait until
delay start time completes.
4. Turn on water supply.
Fascia panel
discolored
or marked
1. Abrasive cleaner used. 1. Use mild detergents with soft
damp cloth.
Noise during
wash cycle
1. Dishes may not be arranged
properly.
1. Water circulation sound is normal, but
if you suspect items are banging into
each other or into the spray arms, refer
to the “Loading the Dishwasher” section
of the manual for optimal arrangement.
Problem Cause Action
Loading ...
Loading ...
Loading ...