Loading ...
Loading ...
Loading ...
E-13
OPERATION
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
Set to ‘low” if the DUST MONITOR is constantly red to reduce sensitivity, and set
to ‘high’ if the DUST MONITOR is constantly green to increase sensitivity.
1
With the unit OFF, press the Fan Speed Button for 3 seconds.
The Fan Speed Indicator Lights will display the currently set sensor sensitivity level.
The factory setting is Standard, indicated by the MED light.
2
Press the Fan Speed Button to
set the desired sensor sensitivity.
Refer to the diagram on the right to select
the desired sensor sensitivity level.
3
Press the Power OFF Button.
Note that if the Power OFF Button is not pushed within 8 seconds of adjusting sensor
sensitivity, the setting will be saved automatically. The sensor sensitivity setting will be
saved even if the unit is subsequently unplugged.
Sensor Detection
sensitivity
Fan Speed
Indicator Light
High
Standard
Low
Use when the light on the control panel is too bright.
Refer to the diagram to select the desired brightness on the front panel.
NOTE:
The lights on the control panel are always brighter when first operatings.
The lights on the front panel are brighter.
The lights on the front panel are darker.
The lights on the front monitor turn off.
LIGHT CONTROL BRIGHT/DIM/OFF button
OFF TIMER button
(Running)
When you want to set the auto shutdown time.
Each press will change the setting in the
following sequence.
Beep BeepBeep
Beep Beep Beep
2h 4h 8h
DISABLE
Beep Beep
ENABLE DISABLE
ENGLISH
Loading ...
Loading ...
Loading ...