Loading ...
Loading ...
Loading ...
24
en
Accumulated frost need only be
removed if the layer of frost or ice
reaches a thickness of more than 5mm
on the entire freezer shelf surface.
• Do not allow grease or oil to come into
contact with plastic parts inside the
refrigerator or the door seal. Both this
plastic and the rubber door seal are
liable to perish.
• To enhance appliance performance to
the full, do not place foodstuff near to
the refrigerator compartment sensor
(fig. Q/19).
Turning off and
disconnecting the
appliance
Turning off the appliance
• To turn the refrigerator off, press
button W/1. The interior lighting and
display W/4 both go aut.
• To turn the freezer off, press button
W/12. Display W/7 goes out.
Disconnecting the
appliance
When the appliance is not to be used for
a long period of time:
• Remove the plug from the mains
electricity socket.
• Defrost and clean the appliance.
• Leave the doors on the appliance
open.
Refrigerator
equipment
The positions of the shelves in the
refrigerator and the racks and shelves
on the inside of the door can be changed
individually:
Figure R
• Slide the shelves forwards, tilt them
downwards and remove.
Figure T
• Lift the racks and shelves on the inside
of the door and remove or set to new
position.
Optional equipment
(not included on all models)
Bottle rack
Figure Y
The rack means that bottels do not fall
over when the door is opened or closed.
EN.qxd 08/02/05 10:13 Page 24
Loading ...
Loading ...
Loading ...