Loading ...
Loading ...
Loading ...
en Rinse aid
24
2. Add rinse-aid up to the max. mark.
3. Close the lid.
Lid “clicks” into position.
4. Remove overflowed rinse aid with a
cloth.
This prevents excessive frothing
during the next rinse cycle.
Setting amount of rinse aid
The amount of rinse aid to be
dispensed can be set from 0 to 6. Set
the amount of rinse aid to be dispensed
to 5 to obtain a very good drying result.
Do not change the amount of rinse aid
unless there are streaks or water stains
on the dishes. Set a lower level to avoid
streaks. Set a higher level to avoid
water stains.
Here’s how to set the amount of rinse
aid:
1. Switch on ON/OFF switch (.
2. Press and hold the Info button {
h for 3 seconds until the following
text appears on the front display
)B:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
3. Press the > )2 button repeatedly
until Rinse aid dispenser appears on
the front display )B.
4. Adjust the setting using the setting
buttons + and - P.
5. Press and hold the Info button {
h for 3 seconds.
The chosen setting has now been
stored.
Switching off rinse aid refill
indicator
If the use of combined detergents with a
rinse-aid component impairs the low
rinse-aid indicator 8 on the control
panel or the text on the front
display * )B (enough rinse aid for x
rinse cycles), the displays can be
switched off.
Proceed as described under “Setting
amount of rinse aid” and select
setting 0.
* depending on the features of your
dishwasher
PD[
Loading ...
Loading ...
Loading ...