Loading ...
Loading ...
Loading ...
9
ENG
ENGLISH
y
Illustrations in this document represent typical
procedures, so they may look different from the actual
product.
y
Do not carry the monitor upside down by just holding
the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
y
When lifting or moving the monitor, do not touch the
monitor screen. The force applied to the monitor screen
may cause damage to it.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y
Applying excessive force when tightening screws
may cause damage to the monitor. Damage caused
in this way will not be covered by the product
warranty.
Mounting on a table
1
Lift and tilt the Monitor set into its upright position
on a table.
Leave a 100 mm (minimum) space from the wall for
proper ventilation.
2
Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
3
Press the Power button on the front of the monitor
to turn on the monitor.
100 mm
100 mm
100 mm
100 mm
CAUTION
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
y
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
NOTE
Loading ...
Loading ...
Loading ...