Loading ...
Loading ...
Loading ...
ASSEMBLE SURFACE BURNERS (CONT.)
Oval (Center) Burner Head/Cap Assembly
(on some models)
Place the oval (center) head/cap assembly over the
electrode on the cooktop.
Caps
Place the matching size caps onto the burner bases
or heads.
Make sure that the heads and caps are replaced in the
correct locations.
Grates
Place the left, right and center grates on the cooktop.
These grates are position specific. The undersides of
the left and right grates are marked “LEFT FRONT” and
“RIGHT FRONT.” Place the middle grate with its bowed
front toward the front of the range.
CAUTION:
Do not operate the burner
without all burner parts in place.
D
C
B
5
Installation Instructions
ELECTRICAL CONNECTIONS
(CONT.)
3
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician before
using the appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In
Canada, mobile home installation must be in
accordance with the current CAN/CSA Z240/MH
Mobile Home Installation Code.
Electric Disconnect
■ Locate disconnect plug on the range back.
■ Pinch sides of connector and pull out of range back.
SEAL THE OPENINGS
4
Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.
ASSEMBLE SURFACE BURNERS
5
Burner Heads
Place burner heads over the electrodes on the cooktop,
in the correct locations according to their size. There is
one small, one medium, one large and one extra large
burner head.
A
Medium head
Front of range
Large head
Small head
Extra
large head
Electrode
Slot
Front of range
Oval head and cap
assembly
Medium cap
Front of range
Large cap
Small cap
Extra
large cap
Make sure the slot in the
burner head is positioned
over the electrode.
Left Front
Right Front
Center
Make sure the
slot in the burner
head is positioned
over the
electrode.
Electrode
Slot
42
Loading ...
Loading ...
Loading ...