Loading ...
Loading ...
Loading ...
11
FINAL INSTALLATION
4. Partially insert the blade screws (BB) along with the
blade washers (CC) through the blade (K) and into the
blade arm (J). Tighten each blade screw (BB) with a
Phillips screwdriver, starting with the one in the middle.
Repeat this step for the remaining blades (K) and blade
arms (J).
Hardware Used
BB
Blade Screw x 12
Blade Washer x 12
5. Install the blade arm (J) to the underside of the motor
(D) with motor screws (N) previously removed (Step 3,
page 10). Tighten with Phillips screwdriver.
Repeat for each blade arm (J).
6. Remove the three preassembled switch housing screws
(M) from the light pan (G). Lift the light pan (G) onto
the light kit (F) and secure the light pan (G) with the
previously removed switch housing screws (M).
Note: Align the notch in the light kit with the bump on
the lower edge of the light kit.
4
5
BB
CC
K
J
J
N
D
6
G
M
F
CC
Bump
Notch
Loading ...
Loading ...
Loading ...