Loading ...
Loading ...
Loading ...
6
into the “Water outlet hole” (See Fig.02). Then insert the water tank back into
the unit, so the unit can resume operation.
The continuous drainage hose will need to be directed towards an outdoor
area for unrestricted flow of water.
FILTER REMOVAL
•
The filter can be removed from its slot by pulling on the filter handle and
sliding it out from the back of the appliance.
• It is recommended that the filter is removed
and cleaned with warm water, below 40°C
every 2 weeks. Allow for it to dry naturally
and then reinstall.
MAINTENANCE INSTRUCTIONS
1. Do not position the unit on an uneven surface when in operation to avoid
vibration and noise and potential damage to the unit.
2. Never insert any objects into the unit’s body to avoid hazards or unit
failure.
3. During power off or when not in use for a long time, please remove the
power cord from the outlet.
4. For better dehumidifying, the areas in front and rear of the unit should
be clear and free from obstacles.
5. Clean the air filter once every two weeks (never use alcohol, gasoline,
or hot water with a temperature of over 40
0
C).
7
TROUBLE SHOOTING
SPECIFICATIONS
MODEL
SPECIFICATIONS
GDDEU30
POWER SUPPLY 220-240V~50Hz
POWER INPUT(EN60335) 390W
RUNNING CURRENT 1.8A
NET WEIGHT 13.4Kg
MOISTURE REMOVAL
( 30
℃
RH80%)
30 litres/day
CABINETDIMEMSION 360Wx246D x506H
TEMP. RANGE FOR USE
5⁰C~32⁰C
WATER TANK CAPACITY 3.2L
(CE) N 842/2006:
R410A is a type of fluorinated greenhouse gases covered by the Kyoto Protocol.
Its total global warming potential (GWP) is 1975
Problems Cause of problem Solution
E1 Temperature sensor error
indicating E1, control system is off
please contact service agent or
similarly qualified persons for
repair
E2 Coil sensor error indicating E2,
control system is off
Loading ...