Loading ...
Loading ...
Loading ...
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
NOTICE
Risk of damage to side-by-side appliances due to condensa-
tion!
When a side-by-side appliance (S…) is fitted together with a
second appliance (as a SBS combination), the door hinges
must remain as delivered.
u
Do not change over the door hinges.
Ensure that the following tools are to hand:
q
Torx® 25
q
Torx® 15
q
Screwdriver
q
Battery-powered screwdriver, if necessary
q
Second person for fitting work, if needed
4.3.1 Detaching the door
Fig. 4
u
Close the door.
u
Pull off the cover
(10)
forwards and upwards.
u
Lift off the cover
(11)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Unscrew the upper turn hinge
(12)
(2x Torx® 25)
(13)
and lift
it off.
u
Lift off the door and set it aside.
4.3.2 Changing the bearing parts
Fig. 5
u
Lift out the bearing pin
Fig. 5 (22)
together with washer
Fig. 5 (23)
and adjustable-height foot*
Fig. 5 (24)
.
u
Lift off the stopper
Fig. 5 (21)
.
u
Unscrew
Fig. 5 (26)
the turn hinge
Fig. 5 (25)
.
u
Unscrew
Fig. 5 (29)
the bearing element
Fig. 5 (28)
, transfer
it to the opposite location hole of the turn hinge and screw it
firmly into place.
u
Carefully lift off the cover on the handle side
Fig. 5 (27)
,
undo the screw
Fig. 5 (40)
and transfer both to the opposite
side.
u
Screw the turn hinge
Fig. 5 (25)
firmly into place on the new
hinge side, possibly using a cordless screwdriver (with
4 Nm).
u
Re-insert the stopper
Fig. 5 (21)
into the other hole.
u
Re-insert the bearing pin
Fig. 5 (22)
together with the
washer and adjustable-height foot*. In so doing, pay atten-
tion that the locating lug points backwards
4.3.3 Transferring the handle
u
Transfer the spring clamp
Fig. 6 (31)
: Depress the
latch nose and pull the
spring clamp off over it.
u
Slide the spring clamp
into place on the new
hinge side until it clicks
into place.
Fig. 6
Putting into operation
6 * Depending on model and options
Loading ...
Loading ...
Loading ...