Loading ...
Loading ...
Loading ...
If the ignition switch is cycled, this sequence will repeat,
providing the system fault still exists. If the system fault no
longer exists, the “TPMS Warning Light” will no longer
flash, and the ⬙SERVICE TPM SYSTEM⬙ message will no
longer display, and a pressure value will display in place of
the dashes. A system fault can occur due to any of the
following:
• Signal interference due to electronic devices or driving
next to facilities emitting the same radio frequencies as
the TPM sensors.
• Installing aftermarket window tinting that contains ma-
terials that may block radio wave signals.
• Accumulation of snow or ice around the wheels or
wheel housings.
• Using tire chains on the vehicle.
• Using wheels/tires not equipped with TPM sensors.
A system fault may occur due to an incorrect TPM sensor
location condition. When a system fault occurs due to an
incorrect TPM sensor location, the “TPMS Warning Light”
will flash on and off for 75 seconds and then remain on
solid. The system fault will also sound a chime. In addition,
the instrument cluster will display a “Tire Pressure Tem-
porarily Unavailable” message in place of the tire pressure
display screen. If the ignition switch is cycled, this se-
quence will repeat, providing the system fault still exists. If
the system fault no longer exists, the “TPMS Warning
Light” will no longer flash and the tire pressure display
screen will be displayed showing the tire pressure values
for the correct locations.
Tire Pressure Monitor Display
210 SAFETY
Loading ...
Loading ...
Loading ...