Loading ...
Loading ...
Loading ...
E10
E11
2 PREPARATION
2-5 Iris Mode Setting
DIP switch (iris control select switch) SW2 No. 4 was set to the “OFF” position at the factory.
See the table below to nd the relationship between the position of the switch and signals.
Iris mode
Iris control and operation depend on the following three signals
1
Enforced auto iris command signal from the camera system (IRIS ENF)
(Some camera models are not capable to provide this signal.)
2
AUTO/REMOTE iris command signal from the camera system (IRIS A/R)
3
Setting position of DIP switch (SW2) No. 4 inside the lens body
(“ON” position: I.LOCAL/“OFF” position: I.CAMERA However, I.LOCAL may not be usable depending on the
specications.)
The table below lists the relationship between these three signals and iris mode.
Position of the DIP switch
Command signal from camera
Iris Control signal from Iris mode
IRIS ENF IRIS A/R
OFF ON Auto Camera Auto iris
OFF ON Remote Camera Remote iris
OFF OFF Auto Camera Auto iris
OFF OFF Remote Camera Remote iris
ON ON Auto Camera Auto iris
ON ON Remote Camera Remote iris
ON OFF Auto Switch box Remote iris
ON OFF Remote Switch box Remote iris
DIP switch
Loading ...
Loading ...
Loading ...