Loading ...
Loading ...
Loading ...
E12
Top screen
× 4,
Info screen
× 5
Adjust
screen
Camera Fol
screen
to set the iris voltage
to set the zoom voltage
to set the focus voltage
EnterPassword
screen
Enter the password
Info – Adjust – Camera Fol
Adjusting the Camera Fol Voltage
Iris
Zoom
Focus
The voltages sent back from the lens to the camera can be changed when it is necessary to change the lens side according to the
situation on the camera side (indicators, etc.). A password is required, so please contact the distributing agent or Canon Inc.
to select*
1
to adjust*
2
Press the DISPLAY switch to store the data.
*(Note 1): The data of the selected item is displayed.
When this operation is performed for the rst time, the factory default settings at the
time of shipment will be displayed. These are the values that have been adjusted
to each individual lens. Make a note of them in case they are to be restored.
*(Note 2): The numerical value is a relative value display.
Please note that making a radical change from the original value has the possibility
to inuence other equipment even though it possible to select from -32760 to 32760.
*(Note)
• The factory default settings at the time of shipment will not be restored even when
the reset operation is performed.
• The password is invalid when the power is turned off.
•
Perform password character input by locating the characters using the up and down buttons,
and moving from one character to another or making corrections using the left and right buttons.
Selection item Selection range
Iris
F2.8
-32760–( 0 )–32760
F16
Zoom
Wide
Tele
Focus
Near
Far
Reference: The numerical values in parentheses are the reference values for
the factory defaults at the time of shipment.
Loading ...
Loading ...
Loading ...