LV-7380 User Manual

Loading ...

6. Maintenance

To clean the air-lter:

Vacuum the lter-through the lter cover.

To replace the lter:

1. Remove the lter cover (2 locations) by pushing up on the tab of the cover.

2. Replace two lters.

(1) Gently peel off the lter and clean the lter cover.

(2) Attach the new lter to the lter cover.

The air lter comes in two types. These two lters cannot be interchanged.

This section describes the simple maintenance procedures you should follow to clean the lter and replace the lamp.



Cleaning or Replacing the Filter

The air-lter keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the lter is

dirty or clogged, your projector may overheat.

NOTE: The message for ﬁlter cleaning will be displayed for one minute after the projector is turned on or off.

To cancel the message, press any button on the projector cabinet or the remote control.

CAUTION

• Turnofftheprojector,turnoffthemainpowerswitchandunplugtheprojectorbeforereplacingthelter.

• Onlycleantheoutsideoftheltercoverwithavacuumcleaner.

• Donotattempttooperatetheprojectorwithouttheltercover.

Tab

NOTE: When turning over the projector, slowly place it on a soft cloth so as not to scratch the cabinet.

Loading ...

User Manual - Page 78