Loading ...
Loading ...
Loading ...
6
EN
Introduction
Compatibility
Crank set
This product supports the following crank sets.
Crank set (left/right)
Remarks
SHIMANO FC-R8000
Supports 165 / 170 / 172.5 / 175 mm crank length and 50-34T / 52-36T /
53-39T crank sets.
• When replacing the chain ring, be careful not to disconnect the junction cable of the right
pedaling monitor sensor. See the video on how to remove the chain ring rst on
http://pioneer-cyclesports.com/us-en/support/products/ to conrm the procedure.
Special skills and tools are needed for the installation and calibration of the
product. To install and calibrate, always ask the shop from where you bought the
product to do it.
Since the product is attached to the crank set with an adhesive, it cannot be
removed without destroying the sensor.
Getting
Started
SGY-PM910ZW_ZLW_ZRW_Body.indb 6 2017/8/10
9:56:58
SHIMANO FC-R9100
Supports 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180 mm crank length,
and 50-34T / 52-36T / 53-39T / 54-42T / 55-42T crank sets.
Loading ...
Loading ...
Loading ...