Loading ...
Loading ...
Loading ...
Installation
8
• A standard electrical supply (115 V AC only, 60 Hz, 10A), properly grounded in accordance with National
Electrical Code and local codes and ordinances is required.
• IMPORTANT: Do not kink or pinch the power supply cord between the upright refrigerator/deep freezer and
wall or cabinet.
PLACEMENT OF YOUR APPLIANCE
• Position the upright refrigerator/deep freezer in a dry and well-ventilated place. Keep the upright re-
frigerator/deep freezer away from direct sunlight, heaters, and corrosive gases or chemicals.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
• The upright refrigerator/deep freezer can be easily moved from one room to another by using the pre-
installed wheel rollers.
If the appliance is needed to be lifted, two or more people should move upright refrigerator/deep freezer.
Failure to do so can result in back or other injury.
• We do not recommend installing the appliance on carpet.
DOOR INSTALLATION
This appliance includes a door handle that is not required for opera-
tion. To install the handle, please follow the instructions below:
1. Install the two screws onto the door holes as shown. Make sure
that the screws are securely installed.
2. Carefully line up the door handle to the installed screws.
3. Secure the door handle in place by tightening the pre-installed
recessed screws using the wrench provided.
LEVELING THE UPRIGHT FREEZER
It is important for the upright refrigerator/deep freezer to be leveled in
order to work properly. It can be raised or lowered by turning the two
feet on the bottom of the machine. If the upright refrigerator/deep
freezer is not leveled during installation. The doors may not close or
seal properly, causing cooling, frost, or moisture problems. It is very
important that the upright refrigerator/deep freezer is at level in order
to function properly.
NOTE: This upright refrigerator/deep freezer comes with 2 leveling
legs and 2-wheel rollers
We recommend using a carpenter’s level to check the machine.
.1 Place a carpenter’s level on top of the product to see if the
upright refrigerator/deep freezer is level from front to back and
side to side.
2. Adjust the height of the feet as follows:
• Turn the leveling feet to the right to lower that side of the upright refrigerator/deep freezer
• Turn the leveling feet to the left to raise that side of the upright refrigerator/deep freezer
Loading ...
Loading ...
Loading ...