Loading ...
Loading ...
Loading ...
7
MODE 1: MICROPHONE GAIN AND METERING
When the microphone symbol on the left is lit, the smart knob will control Yeti X’s microphone gain, and the
meters will show the peak level of the signal in real time with green, yellow and red LEDs. When you move
the knob to increase or decrease gain, the meter will temporarily change to blue, showing the gain level you
are setting. For the best sound, set the gain so that your loudest speech peaks at the first or second yellow
light. Stay away from the red light, but be sure you are regularly filling up all of the green lights. When muted,
the green ring on the face of the knob will change to red. Muting and unmuting works in all modes.
Press the Smart Knob for one second to get to Headphone Volume mode. Mode selection is ‘sticky’, meaning
Yeti X will remain in the mode you select until you change it again.
MODE 2: HEADPHONE VOLUME
When the headphone symbol on the right side is lit, the smart knob will control the volume of Yeti X’s
headphone output, with white LEDs displaying the current level. When you move the knob to adjust
the headphone volume, the LEDs will brighten, then dim two seconds after you release the knob.
Press the Smart Knob for one second to get to Blend.
MODE 3: BLEND
When both the microphone and headphone symbols are lit, the smart knob is set to adjust the blend
between the microphone signal and the sound from your computer in your headphones. By default, the
Blend control is set to 50/50 with the white LED centered and the other LEDs unlit. As you turn the knob
towards the appropriate icon, magenta LEDs will start filling in from the center. This is useful when you need
to hear yourself clearly above the audio from a game, for example.
Loading ...
Loading ...
Loading ...