Loading ...
Loading ...
Loading ...
9/32 EN
Refrgerator / User Gude
3 Installaton
3.1 Approprate
nstallaton locaton
Contact an Authorized Service for the
installation of the product. In order to
prepare the product for use, refer the
information in the user manual and
ensure that electrical installation and
water installation are appropriate. If not,
call a qualified electrician and technician
to have any necessary arrangements
carried out.
B
WARNING:Manufacturer
shall not be held lable for
damages that may arse
from procedures carred
out by unauthorzed
persons.
B
WARNING:Product must
not be plugged n durng
nstallaton. Otherwse,
there s the rsk of death or
serous njury!
B
WARNING:If the door
clearance of the room
where the product shall be
place s so tght to prevent
passng of the product,
remove the door of the
room and pass the product
through the door by
turnng t to ts sde; f ths
does not work, contact the
authorzed servce.
•Placetheproductonanevenfloor
surface to prevent jolts.
•Installtheproductatleast30cm
away from heat sources such as hobs,
heater cores and stoves and at least 5
cm away from electrcal ovens.
•Productmustnotbesubjectedto
drect sun lght and kept n humd
places.
•Appropriateairventilationmustbe
provded around your product n order
to acheve an effcent operaton. If the
product s to be placed n a recess n
the wall, pay attenton to leave at least
5 cm dstance wth the celng and sde
walls.
•Donotinstalltheproductinplaces
where the temperature falls below
-5°C.
3.2 Installng the
plastc wedges
Plastc wedges suppled wth the
product are used to create the dstance
for the ar crculaton between the
product and the rear wall.
1.To nstall the wedges, remove the
screws on the product and use the
screws suppled together wth the
wedges.
2.Insert the 2 plastc wedges onto the
rear ventlaton cover as llustrated n
the fgure.
Loading ...
Loading ...
Loading ...