Loading ...
Loading ...
Loading ...
21
Operating
1.
Adjusting the volume
Use the VOL + / - buttons to adjust the volume.
A dialog will appear on the screen to aid you in
adjusting the volume. If you do not do anything,
the dialog will automatically disappear after a few
seconds.
● When
is selected for current picture input port, the volume adjustment is
disabled. Please see AUDIO SOURCE item of AUDIO menu (
50).
● Even if the projector is in the standby mode, the volume is adjustable when
both of the following conditions are true:
- An option other than
is selected for AUDIO OUT STANDBY in the AUDIO
SOURCE item of the AUDIO menu
(
50).
-
NORMAL is selected in the STANDBY MODE item of the SETUP menu
(49).
1.
Press AV MUTE button on the remote control.
The BLANK screen will be displayed instead of the
screen of input signals and the sound from the internal
speakers will be muted. Please refer to the BLANK
item in SCREEN menu about the BLANK screen
(
52).
To exit from the AV MUTE mode and restore the
screen and audio, press AV MUTE button again.
Temporarily turning off the screen and audio
● The projector automatically exits from the AV MUTE mode when some control
buttons are pressed.
Operating
►If you wish to have a blank screen while the projector's lamp
is on, use the AV MUTE function above or the lens shade function (
32). Taking
any other action may cause the damage on the projector.
CAUTION
VOL + / -
buttons
AV MUTE
button
Loading ...
Loading ...
Loading ...