Loading ...
Loading ...
Loading ...
IMPORTANT
When removing or replacing the ice bin, avoid
rotating the auger in the ice bin. If the auger is
accidentally rotated, you must realign the auger
by turning it in 45 degree turns (see below) until
the ice bin fits into place with the drive
mechanism. If the auger is not properly aligned
when replacing the ice bin, the refrigerator will not
dispense ice. The fresh food door also may not
close properly causing warm air to leak into the
fresh food compartment.
Adjusting the Ice Bin Auger
STORAGE FEATURES
CAUTION
To avoid personal injury or property damage,
handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change. Allow the
glass shelves to stabilize to room temperature
before cleaning. Do not wash in dishwasher.
You can easily adjust shelf positions in the fresh
food compartments to suit your needs. The
shelves have mounting brackets that attach to
slotted supports at the rear of each compartment.
To change a shelf position:
1. Remove all food from shelf.
2. Lift the front edge up and pull the shelf out.
3. Replace by inserting the mounting bracket
hooks into the desired support slots.
4. Lower the shelf and lock into position.
To adjust the flip shelf:
1. Remove food from shelf.
2. Lift the right side edge of shelf upwards and
push to the left towards ice maker
Flip Shelf
16
Loading ...
Loading ...
Loading ...