Loading ...
Loading ...
Loading ...
4
CONTENTS
Instructions for the User
Important Safety Information
2
Fastening to the wall
3
Operation
5
Before use 5
Control panel 5
Starting your appliance 5
Temperature control 5
Freezing fresh food 5
Frozen food storage 6
Thawing 7
Making ice cubes 7
Fresh food refrigeration 7
Movable shelves 8
Positioning the door shelves 8
Use of the adjustable temperature compartment 8
Hints and Tips
9
Maintenance and Cleaning
10
Internal cleaning 10
External cleaning 10
When the appliance is not in use 10
Changing the light bulb 10
Defrosting 11
Something Not Working
12
Service and Spare Parts
13
Customer Care
13
Guarantee Conditions
14
Instructions for the
Installer
Technical Specification
15
Installation
16
Positioning 16
Shelf holders 16
Electrical Connection
17
Rear Spacers 18
Door Reversal
18
17
Electrical connections
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and
the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to
prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of your
home.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not correspond
with the markings identifying the terminals in your
plug, proceed as follows:
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
«E» or the earth symbol or coloured green and
yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
D207
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13 AMP
The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse. Only
ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.
A replacement cover/carrier must be obtained from
your local Electrolux Service Force Centre.
This appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interference
suppression.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive)
and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Please ensure that when the appliance is
installed it is easily accessible for the engineer in
the event of a breakdown.
Loading ...
Loading ...
Loading ...