Loading ...
Loading ...
Loading ...
19
Top Control Dishwasher
www.insigniaproducts.com
Step 13: Connecting the drain hose
IMPORTANT:
Follow all local codes and ordinances.
1 Cut on the marked line as required for your installation. The drain hose’s molded end will fit 5/8”, 3/4” or 1"
diameter connections on the air gap, waste tee, or garbage disposal.
2 If a longer drain hose is required, you can add up to 42" (1.1 m) of length, for a total of 10 ft. (3.01 m) to the
factory installed hose. Use 5/8” or 7/8” inside diameter hose and a coupler to connect the two hose ends.
Secure the connection with screw-type hose clamps.
IMPORTANT:
For proper drain operation, the total drain hose length must not exceed 10 ft. (3.01 m).
3 Secure the drain hose to the air gap, waste tee, or garbage disposal with a screw-type clamp, using the
appropriate method below. See “Drain preparation” on page 6, if you do not know which method to to use.
Method 1 - Air gap to a waste tee or garbage disposal.
Cutting lines
IMPORTANT: Do not cut
corrugated portion of hose
Screw-type hose clamp
Screw-type hose clamp
Coupler
Airgap
Airgap
Waste tee installation
Garbage disposal installation
NS-DWH2_BS8_SS8_NS-DWR2_BS8_WH8_SS8_17-0834_Install MAN_V4_ENG.fm Page 19 Friday, December 15, 2017 9:56 AM
Loading ...
Loading ...
Loading ...