Loading ...
Loading ...
Loading ...
Options
f
( o
FAVORITE CYCLE SET
(NO DRY)
POTS NORMAL WATER CHINA QUICK QUICK WATER SANI NO HEAT
PANS MISER WASH WASH RINSE HEAT RINSE DRY
SENSING CYCLES OPTIONS
UltraWashSensor• AutomaticTemperatureControl• ActiveQuietGuardSystem
am Q i D i
SENSING WASHING WATER HEATING SANt COMPLETE CLEAN
IB
CONTROLLOCK
)
J
When should I use it?
What does it do?Option
Water Heat
• Automatic with Pots & Pans
• Option for Normal Wash and
Water Miser cycles
• Not available for China Wash,
Quick Wash or Quick Rinse
cycles
Sani Rinse
• Option for Pots & Pans,
Normal Wash and Water Miser
cycles
• Not available for China Wash,
Quick Wash or Quick Rinse
cycles
No Heat Dry
• Option for Pots & Pans,
Normal Wash, Water Miser
and China Wash cycles
Delay Start
• Option for any cycle
To ensure water temperature in
Main Wash reaches 135°F
(57°C).
To ensure a high temperature,
sanitary final rinse.
Use when you do not need a
rapid dry cycle. Allow longer
dryirlg times (overnight). Use
rinse agent to improve drying.
Use when you want to start a
cycle later.
Set delay to run dishwasher
during times when off-peak
utility rates are in effect. Local
utilities recommend this to
avoid heavy usage of energy
at certain times of day.
• When you select Water Heat, main wash
pauses until water heats to 135°F (57°C).
• As water heats, washing action continues.
Electronic time display pauses until water
reaches proper temperature.
• Water in final rinse is heated to 150°F (66°C).
• When cycle and Sani Rinse option are com-
pleted, Sani Complete status indicator glows.
• If Sani Rinse is not fully completed (power
failure, door being opened, low water tem-
perature), Sani Complete indicator flashes at
the end of the cycle, indicating Sani Rinse is
not complete.
• Turns off heating element in 30-minute dry
period.
• Delay beginning of your selected cycle and
options in one hour increments up to 9 hours.
• To set:
1. Press cycle and option pads.
2. Press Delay Start pad. Increase delay one
hour for each press of Delay Start pad.
Total delay time appears on electronic
time display.
3. Press Start pad. Once Start pad is
pressed, delay begins. Delay time dis-
played on control panel flashes once.
Cycle and options begin as soon as delay
time expires. If Start pad is not pressed
within 30 seconds of final selection, you
need to re-select your cycle, options and
delay settings.
• You can change cycle and option selections
any time during delay period. You can also
eliminate the delay by pressing Start pad any
time. The dishwasher will start immediately.
15
Loading ...
Loading ...
Loading ...