Loading ...
Loading ...
Loading ...
Troubleshooting
Technical problems
General problems
Noise problems
9
Problem Possible cause Solution
The dishwasher does not start. The fuse is blown or the circuit
breaker has been tripped.
Replace the fuse or reset the
circuit breaker. Remove any
other appliances sharing the
same circuit with the
dishwasher.
The power supply is not turned
on.
Check that the dishwasher is
turned on and make sure the
power cord is properly plugged
into the wall socket.
The dishwasher door is not
properly closed.
Check that the door is
completely closed.
Water is not pumped from the
dishwasher.
The drain hose is kinked or
bent.
Check the drain hose.
The filter is clogged. Check the coarse filter for
clogging.
The sink is clogged. Check the sink to make sure it
is draining properly.
Problem Possible cause Solution
There are soap suds left in the
washer.
Improper detergent was used. Use only detergent made
specifically for dishwashers to
avoid soap suds.
The rinse aid was spilled. Always wipe away any spilled
rinse aid.
The washer interior is stained Detergent with colorant was
used.
Use a damp sponge with
dishwasher detergent to clean
the interior.
There is white film on the
inside surface.
This can happen when using
hard water.
Use a damp sponge with
dishwasher detergent to clean
the interior.
There are rust stains on
cutlery.
The affected items are not
corrosion resistant.
Only use items that are
marked as dishwasher safe.
Problem Possible cause Solution
There is a knocking noise. The spray arm is knocking
against an item in the basket.
Pause the wash cycle.
Rearrange the items that are
obstructing the spray arm.
There is a rattling noise. The cutlery is loose in the
basket.
Pause the wash cycle.
Rearrange the items.
There is a knocking noise in the
water pipes.
This may be caused by on-site
installation or the cross-
section of the piping.
This does not affect
performance. If this continues
to be a problem, contact a
qualified plumber.
Loading ...