Loading ...
Loading ...
Loading ...
(3) Press to start defrosting and the cooking time remaining will be displayed.
Note: When two-thirds of the defrost time passes, the oven will pause defrost and beep twice to
remind you to turn over the food. Turn over food, close door and press to resume
defrost cycle.
If there is no operation within 25 seconds during the setting process, the oven will
automatically return to standby mode.
SENSOR MENU ( Sensor Reheat, Sensor Cook, Potato, Pizza, Rice, Casserole, Frozen
Veg, Frozen Pizza, Frozen Entrée)
(1) Place the food in the oven and close the door. Press the appropriate Sensor Menu item pad,
and the oven will start immediately.
(2) For Sensor Reheat or Sensor Cook function, press the corresponding pad repeatedly to select
the menu code. The sensor cooking process starts immediately. When the released steam is
detected by the oven, the remaining cooking time will appear in the display. The oven beeps
4 times when cooking is finished and END will display.
Note:
(1) For best sensor cooking results:
a. The room temperature cannot be over 95 F (35°C).
b. The weight of food must be more than 4 oz (110g).
c.
(2) During cooking:
a. The food can be covered, but the cover or lid must be vented with a hole to allow steam to
escape.
b. Do not open door or pressing at any time during sensor cooking, or will stop the cooking
process and return the oven to standby mode.
c.
function will stop working, show "E-5" in the display and beep every 2 seconds until you
press pad. This oven will automatically reset the function.
Example: Potato Sensor Pad
(1) Press Potato pad once, "SENS" will appear in the display. The cook starts.
Note: Puncture the surface of each potato several times with the tines of a fork.
EN-11
°
CAUTION: DO NOT consume foods immediately after the oven finishes cooking. Heated foods,
especially pizza, may burn your mouth. Allow foods to cool to a safe eating temperature.
The oven cavity, glass tray and utensils must be dry.
While using the sensor function, the sensor will self analyze. If there is an error, the sensor
Loading ...
Loading ...
Loading ...