Loading ...
Loading ...
Loading ...
10.
Install new sealing washers onto the drain
bolts. Tighten the drain bolts.
Crankcase
Torque: 18 lbf·ft (25 N·m, 2.5 kgf·m)
Down tube
Torque: 29 lbf·ft (39 N·m, 4.0 kgf·m)
11.
Fill the oil tank with the recommended oil.
2 P. 44, 2 P. 117
Required oil
When changing oil & engine oil
filter:
2.06 US qt (1.95 L)
When changing oil only:
2.0 US qt (1.9 L)
u
To fill the oil tank to the upper level,
oil should be added in two steps.
12.
Pour the recommended oil into the oil
tank, up to the upper level mark.
13.
Install the oil fill cap/dipstick securely.
14.
Start the engine. Let it idle 5 minutes.
During idling, support your vehicle in an
upright position on a firm, level surface to
assure an accurate oil level reading.
15.
Stop the engine. Remove the oil fill cap/
dipstick.
16.
Add the recommended oil up to the
upper level mark. (Do not overfill.)
17.
Reinstall the oil fill cap/dipstick.
18.
Check the oil level. 2 P. 58
19.
Check that there are no oil leaks.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Engine Oil u Changing Engine Oil & Filter
Maintenance
62
Loading ...
Loading ...
Loading ...