Loading ...
Loading ...
Loading ...
6.
Remove the oil filter cover, oil filter and
spring by removing the oil filter cover
bolts and let the remaining oil drain out.
u Discard the oil and oil filter at an
approved recycling center.
7.
Replace the O-ring and apply a thin coat
of engine oil to the new O-ring before
installing it.
8.
Position the spring against the engine
crankcase and install the new oil filter with
the OUT-SIDE mark facing out.
9.
Install the oil filter cover by tightening the
oil filter cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Engine Oil u Changing Engine Oil & Filter
Maintenance
61
Continued
Oil filter
cover bolts
Oil filter cover
Spring
Oil filter
OUT-SIDE
mark
O-ring
Loading ...
Loading ...
Loading ...